ARCDS SR10 Street Stock
Must run SR10 as RTR out of the box! This class is intended as a entry point into the sport of Dirt Oval Racing at an affordable price point. This will be a point series class with the Allstar RC Dirt Series starting June 26th at Mike’s Hobbies and Gulf Coast Speedway in Porter, Texas.
Shocks & Suspension
- Must run stock shocks and springs
- Changing shock oil in each of the shocks is allowed
- Must run stock 12mm shock piston, 2-hole, Part No.91444
- Limiters in the shocks are allowed
Transmission Gearing & Differential
- Spur gear must be 87T, Part No.9654
- Differential, when turning one back tire, opposite wheel must not turn in the same direction, holding off ground
- No aftermarket upgrades to the drivetrain are allowed, MUST BE ALL Stock SR10 components
- Must run stock slipper clutch assembly, no lockouts
- Any size pinion gear is allowed
Electronics – Motors, ESC, Servo & Radio
- Electronics must be mounted in stock OEM location
- No AVC, GYRO or additional traction control devices allowed (Automatic DQ)
- Motor 3300Kv Reedy From Team Associated is the only motor allowed!
- No Cooling Fa
- ESC must be SC600-BL Brushless ESC
- Steering Servo
- Steering Servos are a racers option. You may replace the stock servo with something more durable. I will leave this open based on racers feedback. Find something where the speed and torque matches your driving style. If you need assistance, seek out the ARCDS for recommendations.
- Radio – XP120 2.4 Radio & Receiver Only
- Radio Part No. 29203
- Receiver Part No.29256 or 29204
Batteries
- 7.4V / 2S LIPOs Maximum (8.42V), running over this voltage is considered HOT!
- 5200mah or less, no more than 50C
- Battery must be mounted down the center of the chassis or in OEM location
- Mike’s Hobbies carries batteries and chargers with RTR kits
Body Style
- Molded SR10 Monte Carlo body or approved bodies noted below are the only allowed bodies in SR10.
- No additional wings, flaps, wickers, vents or air devices allowed
- You may have a total of 1” spoiler including the molded spoiler
- Spoiler may not be wider than the stock molded spoiler
- Decking is not allowed, must have all windows and no cut outs of any window
- Body must be cut to trim lines; No cutting out of the back above bottom of bumper, fender wells can be cut for tire clearance
- Approved Body list:
- SR10 Street Stock Body, Clear (paint/wrap as wanted) Part No. 784695711921
- SR10 Street Stock Body, Clear (Painted) Part No. 784695711938
- JCONCEPTS 1978 Camaro Street Stock Body – Part No. 0395
- JCONCEPTS 1987 Monte Carlo Street Stock Body – Part No. 0422L
Tires & Wheels
- Rubber Tires & 1/10th Tires & Wheels Only
- Must run OEM SR10 front tires Part No.71194 (Pre-Glued Wheel & Tire Assembly)
- You may run the stock SR10 rear tires, Part No.71195 (Pre-Glued Wheel & Tire Assembly)
- You can change the rear tires ONLY, this is an effort allowing the car to work on all track conditions
- JCONCEPTS & DE Tires are allowed on the Rear Only
- JCONCEPTS Rear Sprinters & Prodigy’s Part Numbers:
- Part No.3133-R2 (Medium Soft Long Wear)
- Part No.3133-01 (Blue Soft Compound)
- Part No.3133-02 (Super Soft Compound)
- DE Racing Part No. DER-PRR-D30 (Super Soft Compound)
- DE Racing Part No. DER-PRR-D40 (Soft Compound)
- SR10 Wheels Stock Wheels are allowed
- JCONCEPTS & DE Racing replacement wheels are allowed
- JConcepts Part No.71096
- JConcepts Part No.71097
- JConcepts Part No.3397 (any color)
- JConcepts Part No.3398 (any color)
- DE Racing Part No. DER-DSB-ARB (any color)
- DE Racing Part No. DER-DSB-AFB (any color)
- Tire Sauce is allowed, MRP is the preferred sauce for Gulf Coast Speedway. Tires must be dry when entering the racing surface!
Revised May 5, 2022 – (Tires, Wheels & Servos)
